Design Of An Induction Probe For Simultaneous Measurements Of Permittivity And Resistivity

In this paper, we propose a discussion of the theoretical design and move towards the development and engineering of an induction probe for electrical spectroscopy which performs simultaneous and non invasive measurements on the electrical RESistivity \rho and dielectric PERmittivity \epsilon r of non-saturated terrestrial ground and concretes (RESPER probe). In order to design a RESPER which measures \rho and \epsilon r with inaccuracies below a prefixed limit (10%) in a band of low frequencies (LF) (B=100kHz), the probe should be connected to an appropriate analogical digital converter (ADC), which samples in uniform or in phase and quadrature (IQ) mode, otherwise to a lock-in amplifier. The paper develops only a suitable number of numerical simulations, using Mathcad, which provide the working frequencies, the electrode-electrode distance and the optimization of the height above ground minimizing the inaccuracies of the RESPER, in galvanic or capacitive contact with terrestrial soils or concretes, of low or high resistivity. As findings of simulations, we underline that the performances of a lock-in amplifier are preferable even when compared to an IQ sampling ADC with high resolution, under the same operating conditions. As consequences in the practical applications: if the probe is connected to a data acquisition system (DAS) as an uniform or an IQ sampler, then it could be commercialized for companies of building and road paving, being employable for analyzing "in situ" only concretes; otherwise, if the DAS is a lock-in amplifier, the marketing would be for companies of geophysical prospecting, involved to analyze "in situ" even terrestrial soils.Comment: 37 pages, 7 figures, 3 table

Uso dei codici di fase complementari nei radar a compressione di impulso

Il metodo cosiddetto della “compressione di impulso” è usato da tempo nella tecnica radar. Si tratta di un sistema di codifica del segnale trasmesso che allarga la banda di un segnale radar senza accorciare la durata dell’impulso trasmesso; ciò consente di operare con una minore potenza di picco a parità di energia e, contemporaneamente, mantenere elevato anche il potere risolutivo. Per poter estrarre le informazioni relative alla posizione, l’eco ricevuta deve essere opportunamente trattata, procedimento che, portando ad una riduzione della durata temporale del segnale, viene detto appunto di “compressione”. Esistono varie tecniche di codifica, sia di tipo analogico che digitale; la più semplice tra le seconde è quella che usa “codici di fase”: la fase della portante viene modificata variandola in maniera discreta. Come contropartita dei vantaggi la compressione fa comparire anche dei “lobi laterali” che interferiscono con la corretta rivelazione degli echi, introducendo un “rumore” artificiale che rende più difficile l’identificazione di bersagli vicini. Per questo motivo che sono stati escogitati dei sistemi, detti a codici complementari, caratterizzati da “lobi laterali” assenti. Dopo alcuni richiami generali sui codici di fase, viene presentata una disamina dei possibili modi di trasmissione e ricezione dei codici complementari, mettendo in risalto pregi e difetti di ciascuno

Optimal Requirements of a Data Acquisition System for a Quadrupolar PROBE employed in Electrical Spectroscopy

This paper discusses the development and engineering of electrical spectroscopy for simultaneous and non invasive measurement of electrical resistivity and dielectric permittivity. A quadrupolar probe is able to perform measurements on a subsurface with inaccuracies below a fixed limit in a band of low frequencies. The probe should be connected to an appropriate analogical digital converter (ADC) which samples in uniform or in phase and quadrature (IQ) mode. If the probe is characterized by a galvanic contact with the surface, the inaccuracies in the measurement of resistivity and permittivity, due to the uniform or IQ sampling ADC, are analytically expressed. A large number of numerical simulations prove that the performance of the probe depends on the selected sampler and that the IQ is better compared to the uniform mode under the same operating conditions, i.e. bit resolution and medium

Ice discharge of eastern Dome C drainage area, Antarctica, determined from airborne radar survey and satellite image analysis

Eastern Dome C, southern Talos Dome and northern Taylor Dome are drained by the Priestley, Reeves, David, Mawson and Mackay outlet glaciers, which flow into the Scott Coast on the west side of the Ross Sea, Antarctica. Airborne radar surveys were conducted on these glaciers to determine ice thickness and bed morphology along transverse and longitudinal profiles of the grounded and floating segments. A new analysis of a Landsat Thematic Mapper satellite image using a tracking technique was used to measure ice velocity at grounding lines and along ice tongues. The integration of radar and satellite data helped to locate grounding lines and to calculate the ice discharge. Changes in ice fluxes of floating glaciers were used to determine basal melting and freezing rates. The ice discharge calculated is less than half that required for a zero net surface mass balance according to the inputs given by the accumulation estimates widely adopted at present. The basal melting rates of meteoric ice represent 50% of the net ablation rate

A long term geomagnetic deep sounding analysis from a two-dimensional magnetometer array in Central Italy

Abstract Following the Mw 6.3 earthquake that hit the city of L'Aquila (Central Italy) on the 6th April 2009, a scientific project was proposed with the aim of investigating the Abruzzo area by means of different disciplinary approaches including geological, seismic, and physical studies. Electromagnetic field monitoring in the 0.01–500 mHz frequency band was implemented for the investigation of electromagnetic signals in the Earth's crust. Three measurement stations were installed in a tectonically active area with a radius of about 10 km. Each site was equipped with a fluxgate magnetometer with a 1 Hz sampling rate. This paper describes a long term geomagnetic deep sounding analysis for each site, aimed at investigating the dimensionality of the electrical structure of the subsurface in the area involved in the survey. According to a very simplified RL circuit model, some electrical properties of subsurface are also deduced

Optimal Requirements of a Data Acquisition System for a Quadrupolar Probe Employed in Electrical Spectroscopy

This paper discusses the development and engineering of electrical spectroscopy for simultaneous and non invasive measurement of electrical resistivity and dielectric permittivity. A suitable quadrupolar probe is able to perform measurements on a subsurface with inaccuracies below a fixed limit (10%) in a bandwidth of low (LF) frequency (100kHz). The quadrupole probe should be connected to an appropriate analogical digital converter (ADC) which samples in phase and quadrature (IQ) or in uniform mode. If the quadrupole is characterized by a galvanic contact with the surface, the inaccuracies in the measurement of resistivity and permittivity, due to the IQ or uniform sampling ADC, are analytically expressed. A large number of numerical simulations proves that the performances of the probe depend on the selected sampler and that the IQ is better compared to the uniform mode under the same operating conditions, i.e. bit resolution and medium.Comment: 57 pages, 14 figures, 4 tables; Ann. Geophys. (2010

Inaccuracy Assessment for Simultaneous Measurements of Resistivity and Permittivity applying Sensitivity and Transfer Function Approaches

This paper proposes a theoretical modelling of the simultaneous and non invasive measurement of electrical resistivity and dielectric permittivity, using a quadrupole probe on a subjacent medium. A mathematical-physical model is applied on propagation of errors in the measurement of resistivity and permittivity based on the sensitivity functions tool. The findings are also compared to the results of the classical method of analysis in the frequency domain, which is useful for determining the behaviour of zero and pole frequencies in the linear time invariant (LTI) circuit of the quadrupole. The paper underlines that average values of electrical resistivity and dielectric permittivity may be used to estimate the complex impedance over various terrains and concretes, especially when they are characterized by low levels of water saturation (content) and analyzed within a bandwidth ranging only from low (LF) to middle (MF) frequencies. In order to meet the design specifications which ensure satisfactory performances of the probe (inaccuracy no more than 10%), the forecasts provided by the sensitivity functions approach are less stringent than those foreseen by the transfer functions method (in terms of both a larger band of frequency f and a wider measurable range of resistivity or permittivity).Comment: 50 pages, 11 figures, 3 tables; Earth-prints, http://hdl.handle.net/2122/5180 (2009

Inaccuracy assessment for simultaneous measurement of resistivity and permittivity applying sensitivity and transfer function approaches

The present study proposes a theoretical modeling of simultaneous and noninvasive measurements of electrical resistivity and dielectric permittivity using a quadrupole probe on a subjacent medium. A mathematical-physical model is applied to the propagation of errors in the measurement of resistivity and permittivity based on a sensitivity functions tool. The findings are also compared with results of the classical method of analysis in the frequency domain, which is useful for determining the behavior of zero and pole frequencies in the linear time invariant circuit of the quadrupole. This study underlines that average values of electrical resistivity and dielectric permittivity can be used to estimate complex impedance over various terrains and concretes, especially when they are characterized by low levels of water saturation (content), and are analyzed within a bandwidth ranging only from low to middle frequencies. To meet the design specifications, that ensure satisfactory performances of the probe (inaccuracies of no more than 10%), the forecasts provided by the sensitivity functions approach are discussed in comparison with those foreseen by the transfer functions method (in terms of both the band of frequency f and the measurable range of resistivity rho, or permittivity epsilon)

Design of an induction probe for simultaneous measurements of permittivity and resistivity

In this paper, we propose a discussion of the theoretical design and move towards the development and engineering of an induction probe for electrical spectroscopy which performs simultaneous and non invasive measurements on the electrical RESistivity ρ and dielectric PERmittivity εr of non-saturated terrestrial ground and concretes (RESPER probe). In order to design a RESPER which measures ρ and εr with inaccuracies below a prefixed limit (10%) in a band of low frequencies (LF) (B=100kHz), the probe should be connected to an appropriate analogical digital converter (ADC), which samples in uniform or in phase and quadrature (IQ) mode, otherwise to a lock-in amplifier. The paper develops only a suitable number of numerical simulations, using Mathcad, which provide the working frequencies, the electrode-electrode distance and the optimization of the height above ground minimizing the inaccuracies of the RESPER, in galvanic or capacitive contact with terrestrial soils or concretes, of low or high resistivity. As findings of simulations, we underline that the performances of a lock-in amplifier are preferable even when compared to an IQ sampling ADC with high resolution, under the same operating conditions. As consequences in the practical applications: if the probe is connected to a data acquisition system (DAS) as an uniform or an IQ sampler, then it could be commercialized for companies of building and road paving, being employable for analyzing “in situ” only concretes; otherwise, if the DAS is a lock-in amplifier, the marketing would be for companies of geophysical prospecting, involved to analyze “in situ” even terrestrial soils

Project and Manufacturing of an Autolevelling Vectorial Magnetometer for Volcanic Areas Monitoring

In the frame of EPOT project (technological innovation and automation in the integrated applications of Electromagnetic and POTential field methods in active volcanic areas) an auto levelling magnetometer for geomagnetic field monitoring in volcanic areas, was proposed. In this paper a brief description of this magnetometer and some preliminary tests are described. In particular some characteristics of the non-diagonal elements of the field transform matrix A between the observatory system and the magnetometer placed in a far location are discussed with the relative implication when one of the two magnetometers would be located in a volcanic area